I am Rikki - a new-ish member (joined the end of last year) but I am new to the discourse conversations - so hello all!
I mainly paint but I grew up with a home-economics (sewing and cooking) teacher and a wood shop teacher, so I have always liked making things.
I wanted to ask if anyone had been using the sewing machine to make face masks or scrubs. There are a few groups in South London working on this. Is that something I might be able to do? Either bringing it home or coming in at certain times to work on it?
The sewing machines are idle at the momentā¦but weāve had a couple of requests to take smaller machines home for PPE production
Thereās likely to be a huge need for washable face mask for the general public (assuming NHS supply is sorted soonā¦)
@Ty_design has worked up some brilliant everyday-wear mask designs BTW, watch this space)
Iāve asked @textilestechs about which machines are suitable (thereās a few small ones knocking about, donāt know which work)
Working in the Space: mostly focused on shield production at the moment, but thereās a PPE booking calendar, so we can look at timings
Itās one person at a time at the moment with an air change break of an hour in between to keep it safeā¦and thereās a clean on arrival routine
We also have funds to buy some more sewing machines if this was needed and could be demonstrated to be helpful as a response to COVID-19ā¦probably cheapish but good machines which weād look to donate or sell on afterwards
Also: Iām personally keen on getting a couple of mask trees going locally ā places where the public can pick up a free mask and a link to a donation page if they want to supportā¦would love thoughts on this. The idea would be to make a couple of prominent ones and hope it takes off as an idea
I have been checking a lot of German and Austrian resources as the have announced a rule on mandatory masks in shops and on public transport. The government has asked the public to sew their own masks so there are some great resources which are quickly tried and tested.
There have been a lot of other sewing initiatives that started up to help like scrubhub who sew scrubs for the nhs. They seem to have certain people that cut the parts out and then create kits to be sewn by other volunteers. Similar to our system with the face shields and it seems to work well.
Although there have been a lot of discussions around the best fabric to use the consensus thus far sees a double layer of 100% cotton as the best option as it is washable at a higher temperature and sturdy.
For our purposes I think a pattern that is quick and easy to make while still giving full protection would be best so we can have sewers with different skill levels join in. Probably something with as few parts and seams as possible.
There seem to be 2 types of masks people sew. The first is the rectangular surgical mask type with folds and the second is a more fitted shape curving around the nose and cheeks.
Both have they advantages and disadvantages but the surgical mask type is a one size fits all and more adjustable.
Colour wise I think sticking to muted monochrome colours would be best. Although patterns and bright colours are certainly more fun they need to appeal to a wide variety of people and people who will be given them wonāt get a choice like if they went to buy one.
Weāre happy to fund materials for this ā possibly even some time if people are unwaged at the moment
The sewing shop in Balham/Tooting is doing Click and collect is someone wants to draw up a shopping list (we have random fabric in the Spaceā¦but who knows whatā¦)
I would be happy to get the ball rolling and gather information and a list of material needed and I am happy to fund some of the material costs - and welcome the suggestions and ideas/participation from others too!
Guys and St Thomasā say theyāre okay for most PPE butā¦
At present our immediate need at GSTT is for Protective gowns and coveralls that need to be made from a fabric that is compliant with the PPE standard EN13795 in relation to fluid repulsion properties; currently there is a shortage of compliant fabric which I understand is not readily available in the UK.
I checked with a group that supplied hundreds of gowns in Hampshire and they used Ripstop (100% polyester, @techfolderkites is this kite material. and do you know where to get it?). did a quick Google and it seems to be available. Phoned Sewing and Craft shop at Tooting Bec, but they donāt have any
They had this feedback::
For the gowns - got an email back from a group thatās produced thousands over in Hampshire. they used Ripstop material (100% polyester) and didnāt think there was a supply issue. This is feedback from local trust āPHT (Portsmouth Hospital Trust) contacted me yesterday, congratulating you all on your efforts. Their Infection Control Lead ran a test with glow-spray which helps to test the permeability of the fabric and they are delighted to see that they are to the standard they would also wish to seeā - if GSTT will accept ripstop then we can probably get them some gowns
Weāve had a request from http://www.tootingcommunitykitchen.co.uk/ for 50 face masks of the Olson type linked above (do check out the video as itās full of tips, improvements and efficiencies)
Thatās still quite a lot of masks: do people want to volunteer to tackle a number of them?
Same guide as for face shields: heightened hygiene, COVID-free/non quarantined household, cover mouth + nose (with the first mask you make?) . Washing masks upon receipt is a common guideline too
Anyone up for this? And whatās needed?
P.S. I do realise this has gone off topic from the āHelloā partā¦
I would be happy to get started. A neighbor has a sewing machine I can borrow and I will put in an order for the fabric and pick it up this afternoon if possible.
It looks like pipe cleaners work for the nose bridge (or copper wire) and coffee filters or HEPA fabric work as filters. I can likely order these on amazon.
That video is great and though it will take a little while to get going hopefully once I get the hang of it we can churn out quite a few. It has been years since I have been sewing but hopefully it will all come back.
Does anyone have the name of a fabric shop in the area or at least a bike ride away? I tried to call the ones in Brixton and Tooting and neither answered.
Hi I have a 19 metres of calico (used for developing designs) which is 100% cotton -& have 2 old domestic sewing machines which need servicing. Can I donate to the space or if anyone wants ?
Any idea of thread count/thickness? Mostly thatās hard to find
The guide seems to be pillow case thickness and holding against your mouth and checking how breathable it is (bearing in mind the surface area will be larger in a mask, but material will be doubled, and often with a filter layer. I trust someone else will update this if they have better knowledge!
Itās a wider weave so more breathable than pillow case but heavier as well. If you donāt use it for this the space is welcome to use it for future projects. Otherwise Iāll donate to a friend.
Soā¦we now have 4 sewing machines available to take home for maskmaking and other COVID-related endeavours
Trying to get kits together, but short of elastic right now
A kit will have:
a portable sewing machine
several metres of 100% cotton fabric
some pins
pair of scissors
the pattern
spare needles
thread
a seam ripper
And some elastic (if I can pick it up in the morning)
Taking a kit represents a commitment to make a bunch of face masks (or equivalent) ā we may introduce a booking system/period of loan. Letās see what works (maybe a week?)
Any suggestions of what a reasonable metreage of fabric would be anyone?
And thank you Dermot for dropping off some fabric. At the moment I have fabric, scissors and 18 m of thin elastic - but the sewing machine I borrowed is missing the plug (a critical part!).
If I can take one of the machines (along with some thread) I can get started.
I also ordered about 20 metres of fabric that I am hoping will arrive in the next couple days and I am happy to share.
Just had a request from Nightingale Nursing Home in Clapham South
350 staff, and theyād love masks for them for travelling to and from work (they know the Olson design, but only use medical manufactured masks at the moment for close caring contact)
They said any masks would be great though. So donāt be daunted
Picking up elastic at some point today, and can get kits ready from there
I am very happy to help out. I can sew but I am not the best and efficient. Can see myself knocking out 50 masks. Maybe 10. I would be happy to cut patterns and get them sewers if that is of any help? Iāve seen that system with other groups and it seems to work really well.
