Woodworkers I need your help!

Discussion
1

Hi Woodworkers!
Would one of you talented people be able to replicate replacements for some skirting board & architrave I have installed in the house?

20230324_101318
20230324_101318.jpg2268×4032 1020 KB

I think they can be cut out of some 18mm MDF, its pretty simple stuff, the end-on profiles of them both are as follows
70mm_Profile
70mm_Profile.png948×517 2.17 KB

145mm_Profile
145mm_Profile.png1248×376 1.48 KB

I need 7x 8 foot lengths of the architrave (top) and 2x 8 foot lengths the skirting
Please do let me know what you think, is it possible etc?
Happy to pay for your time & materials obviously

Thanks
Iain

2

For a simple design like that you should be able to use a 10mm straight router bit, with another piece of wood clamped on to serve as a straight edge for the router to run along - can’t see it being very difficult at all really

If you’re using MDF you’d probably want to buy one or two bits just for this project, as MDF dulls router bits super fast

1 Like
3

No need for a straight edge, use one of the router tables